The Best With Zest
English  

Etymotic mc2 Headset - Black (Android Awareness App)


£69.95

 Sold Out 

Best-in-Class

Dr. Mead Killion and his team of engineers set out to create the world’s most accurate noise-isolating headset + earphones under $100 for the cost?conscious consumer. The mc2s deliver on this promise and provide consumers with the best-in-class performance benefits for their money.

  • Best sound accuracy
    • 85%+ response accuracy
    • Tight, accurate bass with crystal clear high?frequency detail at all listening levels
  • Best noise isolation
    • 35 dB - 42 dB of noise isolation
    • Documented highest noise isolation of any earphones or headphones on the market today
    • Programmable Noise-isolation Feature using our AWARENESS!® for Etymotic App
  • Best communication and control
    • Close-proximity high sensitivity microphone
    • Made to work with smartphones and tablets from Blackberry, Samsung, HTC, Motorola Mobility, HP and Apple.
  • Best style and fit
    • High-gloss polished black aluminum finish
    • An assortment of noise-isolating ACCU•Fit eartips options to ensure proper seal and comfort
    • CUSTOM•FIT option available
  • Best durability and warranty
    • 2-year replacement warranty
    • Kevlar®-reinforced cable for durability
    • ACCU•Filter™ User-replaceable filters that protect the moving coil drivers from ear wax
Works with smartphones and tablets including, but not limited to, those running Android, Blackberry, Windows Phone, HP WebOS, Symbian and Apple iOS. Functionality for send/end, play/pause, forward/back track varies with device manufacturers' software. Please verify that your phone or tablet supports a 3.5 mm/ 4-conductor stereo phone plug.
 
Frequency Response
20 Hz - 15 kHz
 
Accuracy Score
85%
 
Transducers
High-output 8-mm neodymium moving coil driver
 
Noise Isolation
35-42 dB
 
Impedance (@1 kHz)
16 Ohms
 
Sensitivity (@1 kHz) SPL at 0.1V
100 dB
 
Maximum Output (SPL)
120 dB
 
Cable
4 ft with 3.5 mm plug
 
User Replaceable ACCU•Filters™
 
 
Warranty
2 years
 
CUSTOM•FIT Option
 
 
mc2 is a trademark of Etymotic Research, Inc.

Selecting an Eartip

The eartip that is most comfortable is the likely choice, but it MUST SEAL well in your ear. If you can easily hear others when the volume is off, you don’t have a good seal. Twist it in deeper, or choose another eartip.

When changing eartips make sure the eartip fits securely on the stem of the earphone.

Proper Insertion

Important: Sound quality, full bass response and noise isolation all depend on a good eartip seal in the ear canal. View

  • Carefully insert the earphone while pulling up and out on the back of the ear.
  • Twist the earphone up into the ear canal while inserting, until outside noise is blocked out.
  • 3-flange eartip: Moistening eases insertion.
  • Foam eartip: Roll down or compress foam eartip before inserting. Hold the eartip in place for about 5 seconds while the foam expands to create a tight seal in the ear canal.
  • Glider eartip: Simply push into ear canal.

Removal

Remove earphones slowly with a twisting motion to gradually break the seal. Do not pull on the cable to remove the earphones.

SEND/END Button Functionality

For most smartphones, the SEND/END Button allows you to answer and disconnect a call. Some phones mute instead of disconnect a call (and some do both). Additional functionality, such as multimedia support (e.g., play/pause or track changes when listening to music) may be available as well. Please consult the owner's manual for your smartphone. 

Care

  • Do not expose the earphones to extreme temperatures.
  • Avoid dropping and strong impact.
  • Leave eartips on the earphones for shock protection.
  • Do not pull on the cord to remove the earphone from the audio device or the ear.
  • Clean or replace eartips prior to use by others.

Cleaning and Replacing Eartips

Over time eartips may lose their elasticity. For best performance and retention, replace 3-flange eartips every 3-6 months. Replace foam and glider eartips regularly.

To clean the 3-flange eartips:

  1. Remove the eartip from the earphone.
  2. Clean with water and mild soap.
  3. Dry the eartip before placing it back on the earphone.

About the Filters

mc2 headset + earphones have special filters that smooth the frequency response and prevent earwax from entering the earphones. A filter is located at the end of the earphone and is visible when the eartip is removed. If a filter becomes clogged, it should be replaced. A dirty filter will reduce earphone output. A filter should be changed if the loudness decreases or the sound quality declines.

Note: Filters are not reusable.

Removal

Note: Use the tool to remove the filter.
1. Remove eartip. 2. Insert tool into the filter. 3. Remove filter and discard.

Replacement

Note: Do not use the tool to replace the filter.
4. Insert a new filter and press
gently against a hard surface
to secure it in place.
5. Re-attach eartip.

Cable Slider

mc2 headset + earphones can be worn with the cables in front or in back of the head. The cable slider can be adjusted by moving it up or down for a snug fit.
mc2 is a trademark of Etymotic Research, Inc.
  • Model: mc2Black
  • Shipping Weight: 0.41 Kg
  • 0 Units in Stock
  • Manufactured by: Etymotic Research Inc

Be the first to write a review.  Write a Review.

This product was added to our catalog on Friday 04 October, 2013.



Manufacturer Info

Who's Online

There currently are 5 guests online.