Best-in-Class
Etymotic makes the world's most accurate noise-isolating headsets and earphones in all price categories. All low-cost earphones are made with dynamic (moving coil) drivers that have undesirable frequency response peaks and weak highs. Etymotic created a design that makes dynamic drivers sound like high-end drivers by inserting a proprietary acoustic side-branch to redistribute energy, smooth the peaks and compensate for weak highs. The result is the mc-series with best-in-class performance under $100.
Best sound accuracy
85%+ accuracy score
Tight, accurate bass with crystal clear high?frequency detail at all listening levels
Best noise isolation
35 dB - 42 dB of noise isolation
Documented highest noise isolation of any earphones or headphones on the market today
Programmable Noise-isolation Feature using our AWARENESS!® HD for Etymotic App made for Android Google Nexus 7
The programmable noise isolation app that lets you listen to music and the outside world at the same time!
Best style and fit
High-gloss polished aluminum finish in 2 chromatic color options
An assortment of noise-isolating ACCU•Fit eartip options ensure proper seal and comfort
CUSTOM•FIT option available
Best durability and warranty
2-year replacement warranty
Kevlar®-reinforced cable for durability
ACCU•Filter™ User-replaceable filters that protect the moving coil driver from ear wax
Frequency Response 20 Hz - 15 kHz
Accuracy Score 85%
Transducers High-output 8-mm neodymium moving coil driver
Noise Isolation 35-42 dB
Impedance (@1 kHz) 16 Ohms
Sensitivity (@1 kHz) SPL at 0.1V 100 dB
Maximum Output (SPL) 120 dB
Cable 4 ft with 3.5 mm plug
User Replaceable ACCU•Filters™
Selecting an Eartip
The eartip that is most comfortable is the likely choice, but it MUST SEAL well in your ear. If you can easily hear others when the volume is off, you don't have a good seal. Twist it in deeper, or choose another eartip.
When changing eartips make sure the eartip fits securely on the stem of the earphone.
Proper Insertion
Important: Sound quality, full bass response and noise isolation all depend on a good eartip seal in the ear canal. View
VIDEO
Carefully insert the earphone while pulling up and out on the back of the ear.
Twist the earphone up into the ear canal while inserting, until outside noise is blocked out.
3-flange eartip: Moistening eases insertion.
Foam eartip: Roll down or compress foam eartip before inserting. Hold the eartip in place for about 5 seconds while the foam expands to create a tight seal in the ear canal.
Glider eartip: Simply push into ear canal.
Removal
Remove earphones
slowly with a twisting motion to gradually break the seal. Do not pull on the cable to remove the earphones.
Care
Do not expose the earphones to extreme temperatures.
Avoid dropping and strong impact.
Leave eartips on the earphones for shock protection.
Do not pull on the cord to remove the earphone from the audio device or the ear.
Clean or replace eartips prior to use by others.
Cleaning and Replacing Eartips
Over time eartips may lose their elasticity. For best performance and retention, replace 3-flange eartips every 3-6 months. Replace foam and glider eartips regularly.
To clean the 3-flange eartips:
Remove the eartip from the earphone.
Clean with water and mild soap.
Dry the eartip before placing it back on the earphone.
About the Filters
mc5 earphones have special filters that smooth the frequency response and prevent earwax from entering the earphones. A filter is located at the end of the earphone and is visible when the eartip is removed. If a filter becomes clogged, it should be replaced. A dirty filter will reduce earphone output. A filter should be changed if the loudness decreases or the sound quality declines.
Note: Filters are not reusable.
Removal
Note: Use the tool to remove the filter.
1. Remove eartip.
2. Insert tool into the filter.
3. Remove filter and discard.
Replacement
Note: Do not use the tool to replace the filter.
4. Insert a new filter and press
gently against a hard surface
to secure it in place.
5. Re-attach eartip.
Cable Slider
mc5 earphones can be worn with the cables in front or in back of the head. The cable slider can be adjusted by moving it up or down for a snug fit.
mc5 is a trademark of Etymotic Research, Inc.